TEKTON 2928 14-Piece Power Nut Driver Bit Set Review
Check price now
Rerate Products
Customer Review
Oct 16, 2011 09:56:06
Bare-Tool DEWALT DW059B 1/2-Inch 18-Volt Cordless Impact Wrench (Tool Only, No Battery) Review
Check price now
Rerate Products
Customer Review
Oct 15, 2011 08:36:52
DEWALT DCF885C2 20-Volt MAX Lithium Ion 1/4-Inch Impact Driver Kit, 1.5 Ah Review
|
 The DCF885C2 lithium-ion compact 1/4-inch impact driver is 5.5 inches long, which increases prodcutivity in small spaces. View larger |
Power
DEWALT-designed electronics have been built into the DCF885L2’s switch to provide maximum life for the tools and batteries by helping to protect them from overheating, overloading, and deep discharge during use. The 20-volt’s lithium-ion batteries provide up to 35 percent more runtime than existing 18-volt lithium-ion battery technology. The included charger has dual voltage capabilities, and it is compatible with both 12-volt max and 20-volt max DEWALT lithium-ion batteries.
Ergonomics and Ease of Use
The impact driver included in this kit features a one-handed loading 1/4-inch hex chuck that accepts and holds 1-inch bit tips for convenient fastening in tight spaces. Its all-metal belt hook can be attached to either side of the tool, and the slim handle fits easily into users’ hands, increasing the level of comfort during the course of long jobs. The bright built-in LED work light above the trigger has a 20-second delay that improves visibility in dimly lit spaces.
About DEWALT's 20-Volt Max Lithium-Ion Tools
DEWALT’s line of 20-volt max lithium-ion tools features improvements in engineering and design to provide the performance, the ergonomics, and the innovation that contractors require. The new line consists of 11 tools, two lithium ion batteries, and two battery chargers, as well as a number of combo kits.
What's in the Box
One DEWALT DCF885C2 20-volt max lithium-ion 1/4-inch 1.5 Ah impact driver kit, including the 1/4-inch impact driver, a 30-minute charger, two 20-volt 1.5 Ah lithium-ion batteries, one belt hook, and one hard plastic storage and carrying case.
 | ||
| DEWALT's DCF885C2 compact impact drill can tackle a variety of tasks on one long-lasting charge (click to enlarge). | ||
Check price now
Rerate Products
Customer Review
Oct 14, 2011 01:42:12
Bare-Tool Milwaukee 2650-20 M18 18-Volt Impact Driver (Tool Only, No Battery) Review
This Impact wrench delivers 2,200 RPM and a category leading 1,400 in-lbs of torque. Additionally, the driver offers 0-3,200 IPM, providing more impacts for increased productivity. A ¼" Hex Quick Change Chuck allows for easy bit changes while a variable speed trigger provides increased user control. The 2650 deploys a Milwaukee® Designed Impact Mechanism, which increases driving speed and maximizes torque. The Milwaukee® 4-Pole frameless motor maximizes tool efficiency and increases run-time. The lightweight and compact design minimizes user fatigue.
Check price now
Rerate Products
Customer Review
Oct 12, 2011 16:04:28
Bare-Tool Hitachi WH18DL 18-Volt Li-Ion Cordless Impact Driver (Tool Only, No Battery) Review
Check price now
Rerate Products
Customer Review
Oct 11, 2011 04:52:42
DEWALT DCF815S2 12-Volt Max 1/4-Inch Impact Driver Kit Review
|
 Its lightweight, balanced design, and belt clip make this impact driver easy to carry. View larger. |
Additionally, the DEWALT's three LEDs--mounted radially around the barrel--will light your target area for better visibility.
Lightweight Body with User-Friendly Features The DEWALT driver is designed to fit into small spaces where traditional impact drivers don't. |
Check price now
Rerate Products
Customer Review
Oct 09, 2011 19:15:52
Makita TD020DSEW 7.2-Volt Lithium-Ion Cordless Impact Driver Kit Review
Other great features include a comfortable rubber grip, an easy to reach thumb on/off switch and the easiest to use, all-metal, quick-change, hex, Insty bit chuck. The chuck only accepts drill bits and driver bits that have a hex shank at the opposite end of, for example, a no. 2 Phillips driver bit. This really speeds up bit changes. Hex Insty bits have really become the standard and are offered in every drill bit kit available. There is an accessory Makita chuck that converts the quick-change hex bit chuck into the older style 3-jaw chuck that will accept round shank drill bits, so you can use your existing bits.
What I like most about this tool is it bends nearly 90 degrees for controlled driving. Driving in-line is great for fast, light-duty driving. For example, electricians use these tools for installing wall plates over outlets and switches. Driving at a right angle is used for driving longer screws and driving/drilling where more controlled accuracy is needed. This tool also has an LED light under the chuck that illuminates the work area, which is great for working in dark cabinets and under shelves. -- Gabriel Shantara Ford
What's in the Box
Battery, charger, one drill bit, two driver bits, a tool holster with belt loop (not a clip-on), padded carrying case.
The most powerful in-line screwdriver to date! Why? Well, two reasons: it sports the extended run time, high energy output Lithium-Ion batteries, and it's also an impact driver. It may seem unbelievable to have an impact driver so small, but it's true. An impact driver hammers the chuck laterally to give increased torque to drilling and driving operations, as opposed to just relying on the motor to spin the chuck. This powerhouse provides 12-volt power, with Lithium-Ion and impact energy, in only 7.2 volts. This sweet little tool offers twice the torque of other 7.2 volt in-line screw drivers and any other in its class. Most in-line screw drivers are only 3.6 volts. This new Makita tool offers twice the voltage, twice the power and twice the run time of standard models.Other great features include a comfortable rubber grip, an easy to reach thumb on/off switch and the easiest to use, all-metal, quick-change, hex, Insty bit chuck. The chuck only accepts drill bits and driver bits that have a hex shank at the opposite end of, for example, a no. 2 Phillips driver bit. This really speeds up bit changes. Hex Insty bits have really become the standard and are offered in every drill bit kit available. There is an accessory Makita chuck that converts the quick-change hex bit chuck into the older style 3-jaw chuck that will accept round shank drill bits, so you can use your existing bits.What I like most about this tool is it bends nearly 90 degrees for controlled driving. Driving in-line is great for fast, light-duty driving. For example, electricians use these tools for installing wall plates over outlets and switches. Driving at a right angle is used for driving longer screws and driving/drilling where more controlled accuracy is needed. This tool also has an LED light under the chuck that illuminates the work area, which is great for working in dark cabinets and under shelves.
Check price now
Rerate Products
Customer Review
Oct 08, 2011 14:27:34
